dns

WARNING: 0.2.x is NOT backwards compatiple with 0.1.x

Overview
Module Description - What the module does and why it is useful
Setup - The basics of getting started with dns
Usage - Configuration options and additional functionality
- Basic Config
- Master Slave Config
Reference - An under-the-hood peek at what the module is doing and how
Limitations - OS compatibility, etc.
Development - Guide for contributing to the module

Overview

Manage the installation and configuration of knot and nsd installations. Also allows for managing master -> slave relations via exported resources.

Module Description

This module acts as an interface to icann-nsd and icann-knot to allow the same config yto manage both servers and ease switch between the two daemons. It can also use exportedconcat resources to manage master slave relationships

Setup

What dns affects

installs and manages icann-knot
installs and manages icann-nsd
dynamicly sets processor count based on installed processes
Optionaly install zonecheck python library and associated cron job. (if thier is a problem with dns a custom fact is created which can be used by other modules, see icann-quagga)

Setup Requirements

puppetlabs-stdlib 4.12.0
puppetlabs-concat 1.2.0
icann-knot 0.2.0
icann-nsd 0.2.0
icann-tea 0.2.8
stankevich-python 1.15.0

Beginning with dns

install either a dns daemon, which one depends on OS:

class { '::dns': }

Force a specific daemon and disable zonecheck

class { '::dns':
  daemon => 'knot',
  enable_zonecheck => false,
}

and in hiera

dns::daemon: knot
dns::enable_zonecheck: false

Usage

Basic Config

Add config with primary tsig key

class {'::dns':
  default_tsig_name: 'test',
  tsigs => {
    'test',=>  {
      'algo' => 'hmac-sha256',
      'data' => 'adsasdasdasd='
    }
  }
}

or with hiera

nsd::default_tsig_name: test
nsd::tsigs:
  test:
    algo: hmac-sha256
    data: adsasdasdasd=

add zone files. zone files are added with sets of common config.

class {'::nsd':
  remotes => {
    master_v4 => { 'address4' => '192.0.2.1' },
    master_v6 => { 'address6' => '2001:DB8::1' },
    slave     => { 'address4' => '192.0.2.2' },
  }
  zones => {
    'example.com' => {
      'masters' => ['master_v4', 'master_v6']
      'provide_xfrs'  => ['slave'],
    },
    'example.net' => {
      'masters' => ['master_v4', 'master_v6']
      'provide_xfrs'  => ['slave'],
    }
    'example.org' => {
      'masters' => ['master_v4', 'master_v6']
      'provide_xfrs'  => ['slave'],
    }
  }
}

in hiera

nsd::remotes:
  master_v4:
    address4: 192.0.2.1
  master_v6:
    address4: 2001:DB8::1
  slave:
    address4: 192.0.2.2
nsd::zones:
  example.com:
    masters: &id001
    - master_v4
    - master_v6
    provide_xfrs: &id002
    - slave
  example.net:
    masters: *id001
    slave: *id002
  example.org:
    masters: *id001
    slave: *id002

create and as112 server

class {'::nsd::as112': }

Master Slave Config

This module makes exports dns::tsig and dns::remote objects from one set of servers and imports them into another set of servers to allow you to configure master slave relations

The parameters dns::imports and dns::exports are used to create pairs. if one server has dns::exports = ['test'] then a master server would import this config by including dns::imports = ['test']. The way that the importing and exporting works in the nsd and knot modules assumes you are running a monolithic install. Other puppet configuerations will need some effort to get working.

Simple master server example

The following is an example where we have one server pull the root zones from xfr.dns.icann.org and then distributes the zones to a second layer of dns servers that use tsig keys, note the TSIG key was created specificly for this example it should not be used in a production environment. the following examples will use hiera for config

Distributions server

Assume the ip address of this server is 192.0.2.1

include dns

dns::imports: ['rootserver']
dns::remotes:
  lax.xfr.dns.icann.org:
    address4: 192.0.32.132
    address6: 2620:0:2d0:202::132
  iad.xfr.dns.icann.org:
    address4: 192.0.47.132
    address6: 2620:0:2830:202::132
dns::default_masters:
- lax.xfr.dns.icann.org
- iad.xfr.dns.icann.org
dns::zones:
  '.':
    zonefile: root
  'arpa.': {}
  'root-servers.net.': {}

Edge server

dns::exports: ['rootserver'] dns::tsigs: edge_tsig: data: 'qneKJvaiXqVrfrS4v+Oi/9GpLqrkhSGLTCZkf0dyKZ0=' dns::remotes: distribution_server: address4: 192.0.2.1 dns::default_masters:

distribution_server dns::zones: '.': zonefile: root 'arpa.': {} 'root-servers.net.': {}

Complex master server example

The following is an example where we have three layers of server top layer -> middle -> edge. The basics of this is to demonstrate how a server (middle) can both import and export configuration. This example will also use hiera with a hierarchy as follows, this allows you to configure the zones in one common locatio9ns and the relations ships in the node specific filess, this allows you to configure the zones in one common locatio9ns and the relations ships in the node specific files

:hierarchy:
  - "nodes/%{trusted.certname}"
  - "common"

Common.yaml

dns::zones:
  in-addr.arpa: {}
  in-addr-servers.arpa: {}
  ip6.arpa: {}
  ip6-servers.arpa: {}
  mcast.net: {}
  as112.arpa: {}
  example.com: {}
  example.edu: {}
  example.net: {}
  example.org: {}
  ipv4only.arpa: {}
  224.in-addr.arpa: {}
  225.in-addr.arpa: {}
  226.in-addr.arpa: {}
  227.in-addr.arpa: {}
  228.in-addr.arpa: {}
  229.in-addr.arpa: {}
  230.in-addr.arpa: {}
  231.in-addr.arpa: {}
  232.in-addr.arpa: {}
  233.in-addr.arpa: {}
  234.in-addr.arpa: {}
  235.in-addr.arpa: {}
  236.in-addr.arpa: {}
  237.in-addr.arpa: {}
  238.in-addr.arpa: {}
  239.in-addr.arpa: {}

Top layer server:

Assume the ip address of this server is 192.0.2.1

dns::imports: ['top_layer']
dns::daemon: nsd
dns::remotes:
  lax.xfr.dns.icann.org:
    address4: 192.0.32.132
    address6: 2620:0:2d0:202::132
  iad.xfr.dns.icann.org:
    address4: 192.0.47.132
    address6: 2620:0:2830:202::132
dns::default_masters:
- lax.xfr.dns.icann.org
- iad.xfr.dns.icann.org

Mid layer server:

Assume the ip address of this server is 192.0.2.2

dns::exports: ['top_layer']
dns::imports: ['mid_layer']
dns::default_tsig_name: mid_layer_tsig
dns::tsigs:
  mid_layer_tsig:
    data: qneKJvaiXqVrfrS4v+Oi/9GpLqrkhSGLTCZkf0dyKZ0=
dns::remotes:
  top_server:
    address4: 192.0.2.1
dns::default_masters:
- top_server

Edge leyer server

dns::exports: ['mid_layer']
dns::default_tsig_name: edge_layer_key
dns::tsigs:
  edge_layer_key:
    L7WLyxJGM5X8tfmzMKdfaQt369JWxAMTmm09ZFgMTc4=
dns::remotes:
  mid_layer_server:
    address4: 192.0.2.2
dns::default_masters:
- mid_layer_server

Classes

Public Classes

Class: `dns`

Guides the basic setup and installation of KNOT on your system

Parameters (all optional)

default_tsig_name (Optional[String], Default: undef): the default tsig to use when fetching zone data. Knot::Tsig[$default_tsig_name] must exist
default_masters (Array[String], Default: []): Array of Knot::Remote names to use as the default master servers if none are specified in the zone hash
default_provide_xfrs (Array[String], Default: []): Array of Knot::Remote names to use as the provide_xfr servers if none are specified in the zone hash
daemon (/^(nsd|knot)$/, Default: os dependent): which daemon to use
nsid (String, Default: FQDN): string to use for EDNS NSID queires
identity (String, Default: FQDN): string to use for hostname.bind queires
ip_addresses (Array, Default: [@ipaddress]): IP addresses that daemon should listen on
imports (Array, Deafult: []): Array of dns::exports to import
exports (Array, Default: []): Array of dns::imports to export to
ensure (Pattern[/^(present|absent)$/], Default: present): whether to install dns daemon
enable_zonecheck (Boolean, Default: true): Weather to install and manage zonecheck
zones (Hash, Default: {}): A hash of nsd::zone or knot::zone resourves
files (Hash, Default: {}): A hash of nsd::file or knot::file resourves
tsigs (Hash, Default: {}): A hash of nsd::tsig or knot::tsig
enable_nagios (Boolean, Default: false): export nagios_Service definitions for each zone

Private Classes

Class `dns::params`

Set os specific parameters

Limitations

This module has been tested on:

Ubuntu 12.04, 14.04
FreeBSD 10

Development

Pull requests welcome but please also update documentation and tests.

dns