Puppet Class: ironic
- Defined in:
- manifests/init.pp
Overview
Copyright © 2013 eNovance SAS <licensing@enovance.com>
Author: Emilien Macchi <emilien.macchi@enovance.com>
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Class: ironic
Installs the ironic package and configures /etc/ironic/ironic.conf
Parameters:
- enabled
-
(required) Whether or not to enable the ironic service true/false
- package_ensure
-
(optional) The state of the package Defaults to ‘present’
- my_ip
-
(optional) IP address of this host. If unset, will determine the IP programmatically. If unable to do so, will use “127.0.0.1”. Defaults to $facts.
- my_ipv6
-
(optional) IP address of this host using IPv6. Defaults to $facts.
- auth_strategy
-
(optional) Default protocol to use when connecting to glance Defaults to ‘keystone’. ‘https’ is the only other valid option for SSL
- default_resource_class
-
(optional) Default resource class to use for new nodes when no resource class is explicitly requested. Defaults to $facts
- executor_thread_pool_size
-
(optional) Size of executor thread pool when executor is threading or eventlet. Defaults to $facts.
- rpc_response_timeout
-
(optional) Seconds to wait for a response from a call. (integer value) Defaults to $facts.
- rpc_transport
-
(optional) Defines a remote procedure call transport between conductor and API processes, such as using a messaging broker or JSON RPC. Defaults to $facts
- control_exchange
-
(optional) What RPC queue/exchange to use (string value) Defaults to $facts
- default_transport_url
-
(optional) A URL representing the messaging driver to use and its full configuration. Transport URLs take the form:
transport://user:pass@host1:port[,hostN:portN]/virtual_hostDefaults to $facts
- rabbit_use_ssl
-
(optional) Connect over SSL for RabbitMQ. (boolean value) Defaults to $facts
- rabbit_ha_queues
-
(optional) Use HA queues in RabbitMQ. (boolean value) Defaults to $facts
- rabbit_heartbeat_timeout_threshold
-
(optional) Number of seconds after which the RabbitMQ broker is considered down if the heartbeat keepalive fails. Any value >0 enables heartbeats. Heartbeating helps to ensure the TCP connection to RabbitMQ isn’t silently closed, resulting in missed or lost messages from the queue. Requires kombu >= 3.0.7 and amqp >= 1.4.0. (integer value) Defaults to $facts
- rabbit_heartbeat_rate
-
(optional) How often during the rabbit_heartbeat_timeout_threshold period to check the heartbeat on RabbitMQ connection. i.e. rabbit_heartbeat_rate=2 when rabbit_heartbeat_timeout_threshold=60, the heartbeat will be checked every 30 seconds. (integer value) Defaults to $facts
- rabbit_heartbeat_in_pthread
-
(Optional) EXPERIMENTAL: Run the health check heartbeat thread through a native python thread. By default if this option isn’t provided the health check heartbeat will inherit the execution model from the parent process. By example if the parent process have monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread. Defaults to $facts
- rabbit_quorum_queue
-
(Optional) Use quorum queues in RabbitMQ. Defaults to $facts
- rabbit_quorum_delivery_limit
-
(Optional) Each time a message is rdelivered to a consumer, a counter is incremented. Once the redelivery count exceeds the delivery limit the message gets dropped or dead-lettered. Defaults to $facts
- rabbit_quorum_max_memory_length
-
(Optional) Limit the number of messages in the quorum queue. Defaults to $facts
- rabbit_quorum_max_memory_bytes
-
(Optional) Limit the number of memory bytes used by the quorum queue. Defaults to $facts
- kombu_ssl_ca_certs
-
(optional) SSL certification authority file (valid only if SSL enabled). (string value) Defaults to $facts
- kombu_ssl_certfile
-
(optional) SSL cert file (valid only if SSL enabled). (string value) Defaults to $facts
- kombu_ssl_keyfile
-
(optional) SSL key file (valid only if SSL enabled). (string value) Defaults to $facts
- kombu_ssl_version
-
(optional) SSL version to use (valid only if SSL enabled). Valid values are TLSv1, SSLv23 and SSLv3. SSLv2 may be available on some distributions. (string value) Defaults to $facts
- kombu_reconnect_delay
-
(optional) How long to wait before reconnecting in response to an AMQP consumer cancel notification. (floating point value) Defaults to $facts
- kombu_failover_strategy
-
(Optional) Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config. (string value) Defaults to $facts
- kombu_compression
-
(optional) Possible values are: gzip, bz2. If not set compression will not be used. This option may notbe available in future versions. EXPERIMENTAL. (string value) Defaults to $facts
- amqp_durable_queues
-
(optional) Define queues as “durable” to rabbitmq. (boolean value) Defaults to $facts
- amqp_server_request_prefix
-
(Optional) Address prefix used when sending to a specific server Defaults to $facts.
- amqp_broadcast_prefix
-
(Optional) address prefix used when broadcasting to all servers Defaults to $facts.
- amqp_group_request_prefix
-
(Optional) address prefix when sending to any server in group Defaults to $facts.
- amqp_container_name
-
(Optional) Name for the AMQP container Defaults to $facts.
- amqp_idle_timeout
-
(Optional) Timeout for inactive connections Defaults to $facts.
- amqp_trace
-
(Optional) Debug: dump AMQP frames to stdout Defaults to $facts.
- amqp_ssl_ca_file
-
(Optional) CA certificate PEM file to verify server certificate Defaults to $facts.
- amqp_ssl_cert_file
-
(Optional) Identifying certificate PEM file to present to clients Defaults to $facts.
- amqp_ssl_key_file
-
(Optional) Private key PEM file used to sign cert_file certificate Defaults to $facts.
- amqp_ssl_key_password
-
(Optional) Password for decrypting ssl_key_file (if encrypted) Defaults to $facts.
- amqp_sasl_mechanisms
-
(Optional) Space separated list of acceptable SASL mechanisms Defaults to $facts.
- amqp_sasl_config_dir
-
(Optional) Path to directory that contains the SASL configuration Defaults to $facts.
- amqp_sasl_config_name
-
(Optional) Name of configuration file (without .conf suffix) Defaults to $facts.
- amqp_username
-
(Optional) User name for message broker authentication Defaults to $facts.
- amqp_password
-
(Optional) Password for message broker authentication Defaults to $facts.
- sync_db
-
Enable dbsync Defaults to true
- db_online_data_migrations
-
(optional) Run online_data_migrations - required on upgrade. Defaults to false.
- purge_config
-
(optional) Whether to set only the specified config options in the ironic config. Defaults to false.
- notification_transport_url
-
(optional) A URL representing the messaging driver to use for notifications and its full configuration. Transport URLs take the form:
transport://user:pass@host1:port[,hostN:portN]/virtual_hostDefaults to $facts
- notification_driver
-
(Optional) Driver or drivers to handle sending notifications. Value can be a string or a list. Defaults to $facts
- notification_topics
-
(optional) AMQP topic used for OpenStack notifications Defaults to $facts
- notification_level
-
(optional) Notification level for outgoing notifications Defaults to $facts
- versioned_notifications_topics
-
(optional) Topics for the versioned notifications issued by Ironic Defaults to $facts
261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 371 372 373 374 375 376 377 378 379 380 381 382 383 384 385 386 387 388 389 390 391 392 393 394 395 396 397 398 399 400 401 402 403 404 405 406 |
# File 'manifests/init.pp', line 261
class ironic (
Boolean $enabled = true,
$package_ensure = 'present',
$my_ip = $facts['os_service_default'],
$my_ipv6 = $facts['os_service_default'],
$auth_strategy = 'keystone',
$default_resource_class = $facts['os_service_default'],
$control_exchange = $facts['os_service_default'],
$executor_thread_pool_size = $facts['os_service_default'],
$rpc_response_timeout = $facts['os_service_default'],
$rpc_transport = $facts['os_service_default'],
$default_transport_url = $facts['os_service_default'],
$rabbit_use_ssl = $facts['os_service_default'],
$rabbit_heartbeat_timeout_threshold = $facts['os_service_default'],
$rabbit_heartbeat_rate = $facts['os_service_default'],
$rabbit_heartbeat_in_pthread = $facts['os_service_default'],
$rabbit_ha_queues = $facts['os_service_default'],
$rabbit_quorum_queue = $facts['os_service_default'],
$rabbit_quorum_delivery_limit = $facts['os_service_default'],
$rabbit_quorum_max_memory_length = $facts['os_service_default'],
$rabbit_quorum_max_memory_bytes = $facts['os_service_default'],
$kombu_ssl_ca_certs = $facts['os_service_default'],
$kombu_ssl_certfile = $facts['os_service_default'],
$kombu_ssl_keyfile = $facts['os_service_default'],
$kombu_ssl_version = $facts['os_service_default'],
$kombu_reconnect_delay = $facts['os_service_default'],
$kombu_failover_strategy = $facts['os_service_default'],
$kombu_compression = $facts['os_service_default'],
$amqp_durable_queues = $facts['os_service_default'],
$amqp_server_request_prefix = $facts['os_service_default'],
$amqp_broadcast_prefix = $facts['os_service_default'],
$amqp_group_request_prefix = $facts['os_service_default'],
$amqp_container_name = $facts['os_service_default'],
$amqp_idle_timeout = $facts['os_service_default'],
$amqp_trace = $facts['os_service_default'],
$amqp_ssl_ca_file = $facts['os_service_default'],
$amqp_ssl_cert_file = $facts['os_service_default'],
$amqp_ssl_key_file = $facts['os_service_default'],
$amqp_ssl_key_password = $facts['os_service_default'],
$amqp_sasl_mechanisms = $facts['os_service_default'],
$amqp_sasl_config_dir = $facts['os_service_default'],
$amqp_sasl_config_name = $facts['os_service_default'],
$amqp_username = $facts['os_service_default'],
$amqp_password = $facts['os_service_default'],
Boolean $sync_db = true,
Boolean $db_online_data_migrations = false,
Boolean $purge_config = false,
$notification_transport_url = $facts['os_service_default'],
$notification_driver = $facts['os_service_default'],
$notification_topics = $facts['os_service_default'],
$notification_level = $facts['os_service_default'],
$versioned_notifications_topics = $facts['os_service_default'],
) {
include ironic::deps
include ironic::db
include ironic::params
include ironic::glance
include ironic::neutron
ensure_resource( 'package', 'ironic-common', {
ensure => $package_ensure,
name => $::ironic::params::common_package_name,
tag => ['openstack', 'ironic-package'],
})
package { 'ironic-lib':
ensure => $package_ensure,
name => $::ironic::params::lib_package_name,
tag => ['openstack', 'ironic-package'],
}
resources { 'ironic_config':
purge => $purge_config,
}
ironic_config {
'DEFAULT/auth_strategy': value => $auth_strategy;
'DEFAULT/my_ip': value => $my_ip;
'DEFAULT/my_ipv6': value => $my_ipv6;
'DEFAULT/default_resource_class': value => $default_resource_class;
'DEFAULT/notification_level': value => $notification_level;
'DEFAULT/versioned_notifications_topics': value => $versioned_notifications_topics;
'DEFAULT/rpc_transport': value => $rpc_transport;
}
if $sync_db {
include ironic::db::sync
}
if $db_online_data_migrations {
include ironic::db::online_data_migrations
}
oslo::messaging::default {'ironic_config':
executor_thread_pool_size => $executor_thread_pool_size,
transport_url => $default_transport_url,
rpc_response_timeout => $rpc_response_timeout,
control_exchange => $control_exchange,
}
oslo::messaging::rabbit {'ironic_config':
rabbit_use_ssl => $rabbit_use_ssl,
heartbeat_timeout_threshold => $rabbit_heartbeat_timeout_threshold,
heartbeat_rate => $rabbit_heartbeat_rate,
heartbeat_in_pthread => $rabbit_heartbeat_in_pthread,
kombu_reconnect_delay => $kombu_reconnect_delay,
kombu_failover_strategy => $kombu_failover_strategy,
amqp_durable_queues => $amqp_durable_queues,
kombu_compression => $kombu_compression,
kombu_ssl_ca_certs => $kombu_ssl_ca_certs,
kombu_ssl_certfile => $kombu_ssl_certfile,
kombu_ssl_keyfile => $kombu_ssl_keyfile,
kombu_ssl_version => $kombu_ssl_version,
rabbit_ha_queues => $rabbit_ha_queues,
rabbit_quorum_queue => $rabbit_quorum_queue,
rabbit_quorum_delivery_limit => $rabbit_quorum_delivery_limit,
rabbit_quorum_max_memory_length => $rabbit_quorum_max_memory_length,
rabbit_quorum_max_memory_bytes => $rabbit_quorum_max_memory_bytes,
}
oslo::messaging::amqp { 'ironic_config':
server_request_prefix => $amqp_server_request_prefix,
broadcast_prefix => $amqp_broadcast_prefix,
group_request_prefix => $amqp_group_request_prefix,
container_name => $amqp_container_name,
idle_timeout => $amqp_idle_timeout,
trace => $amqp_trace,
ssl_ca_file => $amqp_ssl_ca_file,
ssl_cert_file => $amqp_ssl_cert_file,
ssl_key_file => $amqp_ssl_key_file,
ssl_key_password => $amqp_ssl_key_password,
sasl_mechanisms => $amqp_sasl_mechanisms,
sasl_config_dir => $amqp_sasl_config_dir,
sasl_config_name => $amqp_sasl_config_name,
username => $amqp_username,
password => $amqp_password,
}
oslo::messaging::notifications { 'ironic_config':
transport_url => $notification_transport_url,
driver => $notification_driver,
topics => $notification_topics,
}
}
|