Puppet Class: tripleo::profile::pacemaker::database::redis_bundle
- Defined in:
- manifests/profile/pacemaker/database/redis_bundle.pp
Overview
Copyright 2017 Red Hat, Inc.
Licensed under the Apache License, Version 2.0 (the “License”); you may not use this file except in compliance with the License. You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an “AS IS” BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.
Class: tripleo::profile::pacemaker::database::redis_bundle
Containerized Redis Pacemaker HA profile for tripleo
Parameters
- redis_docker_image
-
(Optional) The docker image to use for creating the pacemaker bundle Defaults to undef
- redis_docker_control_port
-
(Optional) The bundle’s pacemaker_remote control port on the host Defaults to 3124
- pcs_tries
-
(Optional) The number of times pcs commands should be retried. Defaults to lookup(‘pcs_tries’, undef, undef, 20)
- bootstrap_node
-
(Optional) The hostname of the node responsible for bootstrapping tasks Defaults to lookup(‘redis_short_bootstrap_node_name’)
- step
-
(Optional) The current step in deployment. See tripleo-heat-templates for more details. Defaults to Integer(lookup(‘step’))
- certificate_specs
-
(Optional) The specifications to give to certmonger for the certificate(s) it will create. Example with hiera:
redis_certificate_specs: hostname: <overcloud controller fqdn> service_certificate: <service certificate path> service_key: <service key path> principal: "haproxy/<overcloud controller fqdn>"Defaults to lookup(‘redis_certificate_specs’, undef, undef, {}).
- enable_internal_tls
-
(Optional) Whether TLS in the internal network is enabled or not. Defaults to lookup(‘enable_internal_tls’, undef, undef, false)
- redis_network
-
(Optional) The network name where the redis endpoint is listening on. This is set by t-h-t. Defaults to lookup(‘redis_network’, undef, undef, undef)
- extra_config_file
-
(Optional) When TLS proxy is in use, name of a host-specific Redis config file that configures tunnel connection. This is set by t-h-t. Defaults to ‘/etc/redis-tls.conf’
- tls_tunnel_local_name
-
(Optional) When TLS proxy is in use, name of the localhost to forward unencryption Redis traffic to. This is set by t-h-t. Defaults to ‘localhost’
- tls_tunnel_base_port
-
(Optional) When TLS proxy is in use, a base integer value that is used to generate a unique port number for each peer in the Redis cluster. Defaults to ‘6660’
- tls_proxy_bind_ip
-
IP on which the TLS proxy will listen on. Required only if enable_internal_tls is set. Defaults to undef
- tls_proxy_fqdn
-
fqdn on which the tls proxy will listen on. required only used if enable_internal_tls is set. defaults to undef
- tls_proxy_port
-
port on which the tls proxy will listen on. Only used if enable_internal_tls is set. defaults to 6379
- container_backend
-
(optional) Container backend to use when creating the bundle Defaults to ‘podman’
- log_driver
-
(optional) Container log driver to use. Defaults to ‘k8s-file’
- log_file
-
(optional) Container log file to use. Only relevant when log_driver is set to ‘k8s-file’. Defaults to ‘/var/log/containers/stdouts/redis-bundle.log’
- tls_priorities
-
(optional) Sets PCMK_tls_priorities in /etc/sysconfig/pacemaker when set Defaults to lookup(‘tripleo::pacemaker::tls_priorities’, undef, undef, undef)
- bundle_user
-
(optional) Set the –user= switch to be passed to pcmk Defaults to ‘root’
- force_ocf
-
(optional) Use –force when creating the ocf resource via pcs Defaults to false
118 119 120 121 122 123 124 125 126 127 128 129 130 131 132 133 134 135 136 137 138 139 140 141 142 143 144 145 146 147 148 149 150 151 152 153 154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 170 171 172 173 174 175 176 177 178 179 180 181 182 183 184 185 186 187 188 189 190 191 192 193 194 195 196 197 198 199 200 201 202 203 204 205 206 207 208 209 210 211 212 213 214 215 216 217 218 219 220 221 222 223 224 225 226 227 228 229 230 231 232 233 234 235 236 237 238 239 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255 256 257 258 259 260 261 262 263 264 265 266 267 268 269 270 271 272 273 274 275 276 277 278 279 280 281 282 283 284 285 286 287 288 289 290 291 292 293 294 295 296 297 298 299 300 301 302 303 304 305 306 307 308 309 310 311 312 313 314 315 316 317 318 319 320 321 322 323 324 325 326 327 328 329 330 331 332 333 334 335 336 337 338 339 340 341 342 343 344 345 346 347 348 349 350 351 352 353 354 355 356 357 358 359 360 361 362 363 364 365 366 367 368 369 370 |
# File 'manifests/profile/pacemaker/database/redis_bundle.pp', line 118
class tripleo::profile::pacemaker::database::redis_bundle (
$certificate_specs = lookup('redis_certificate_specs', undef, undef, {}),
$enable_internal_tls = lookup('enable_internal_tls', undef, undef, false),
$bootstrap_node = lookup('redis_short_bootstrap_node_name'),
$redis_docker_image = undef,
$redis_docker_control_port = 3124,
$container_backend = 'podman',
$pcs_tries = lookup('pcs_tries', undef, undef, 20),
$log_driver = 'k8s-file',
$log_file = '/var/log/containers/stdouts/redis-bundle.log',
$step = Integer(lookup('step')),
$redis_network = lookup('redis_network', undef, undef, undef),
$extra_config_file = '/etc/redis-tls.conf',
$tls_tunnel_local_name = 'localhost',
$tls_tunnel_base_port = 6660,
$tls_proxy_bind_ip = undef,
$tls_proxy_fqdn = undef,
$tls_proxy_port = 6379,
$tls_priorities = lookup('tripleo::pacemaker::tls_priorities', undef, undef, undef),
$bundle_user = 'root',
$force_ocf = false,
) {
if $bootstrap_node and $::hostname == downcase($bootstrap_node) {
$pacemaker_master = true
} else {
$pacemaker_master = false
}
if $log_driver == 'k8s-file' {
$log_file_real = " --log-opt path=${log_file}"
} else {
$log_file_real = ''
}
class { 'tripleo::profile::base::database::redis':
pacemaker_managed => true,
tls_tunnel_local_name => $tls_tunnel_local_name,
tls_proxy_bind_ip => $tls_proxy_bind_ip,
tls_proxy_fqdn => $tls_proxy_fqdn,
tls_proxy_port => $tls_proxy_port,
}
if $step >= 1 {
if $enable_internal_tls {
# certificate_specs is validated by the base redis class
$tls_certfile = $certificate_specs['service_certificate']
$tls_keyfile = $certificate_specs['service_key']
$redis_node_names = lookup('redis_short_node_names', undef, undef, [$::hostname])
$redis_node_ips = lookup('redis_node_ips', undef, undef, [$tls_proxy_bind_ip])
# keep a mapping of [node name, node ip, replication port]
$replication_tuples = zip($redis_node_names, $redis_node_ips).map |$index, $pair| {
$pair.concat($tls_tunnel_base_port+$index)
}
# encrypted endpoints for outgoing redis replication traffic
$redis_peers = $replication_tuples.filter |$tuple| {$tuple[1] != $tls_proxy_bind_ip}
$redis_peers.each |$tuple| {
tripleo::stunnel::service_proxy { "redis_peer_${tuple[2]}":
client => 'yes',
accept_host => $tls_tunnel_local_name,
accept_port => $tuple[2],
connect_host => $tuple[1],
connect_port => $tls_proxy_port,
certificate => $tls_certfile,
key => $tls_keyfile,
notify => Class['redis'],
}
}
# redis slave advertise itself as running on a specific
# <localhost:port> that uniquely identifies it. This value is
# used by the master as is, and points the outgoing stunnel
# endpoint to target this slave.
$local_tuple = $replication_tuples.filter |$tuple| {
$tuple[1] == $tls_proxy_bind_ip
}
if length($local_tuple)!=1 {
fail("could not determine local TLS replication port (local ip: '${tls_proxy_bind_ip}', assigned ports: '${replication_tuples}')")
}
# NOTE: config parameters slave-announce-* are not exposed by
# puppet-redis, so for now we configure them via an additional
# host-specific config file
File {"${extra_config_file}":
ensure => present,
# owner => $::redis::config_owner,
# group => $::redis::config_group,
# mode => $::redis::config_file_mode,
content => "# Host-specific configuration for TLS
slave-announce-ip ${tls_tunnel_local_name}
slave-announce-port ${local_tuple[0][2]}
",
}
} else {
$replication_tuples = []
}
}
if $step >= 2 {
if $pacemaker_master {
if (lookup('redis_short_node_names_override', undef, undef, undef)) {
$redis_short_node_names = lookup('redis_short_node_names_override')
} else {
$redis_short_node_names = lookup('redis_short_node_names')
}
$redis_nodes_count = count($redis_short_node_names)
$redis_short_node_names.each |String $node_name| {
pacemaker::property { "redis-role-${node_name}":
property => 'redis-role',
value => true,
tries => $pcs_tries,
node => downcase($node_name),
before => Pacemaker::Resource::Bundle['redis-bundle'],
}
}
$storage_maps = {
'redis-cfg-files' => {
'source-dir' => '/var/lib/kolla/config_files/redis.json',
'target-dir' => '/var/lib/kolla/config_files/config.json',
'options' => 'ro',
},
'redis-cfg-data-redis' => {
'source-dir' => '/var/lib/config-data/puppet-generated/redis/',
'target-dir' => '/var/lib/kolla/config_files/src',
'options' => 'ro',
},
'redis-hosts' => {
'source-dir' => '/etc/hosts',
'target-dir' => '/etc/hosts',
'options' => 'ro',
},
'redis-localtime' => {
'source-dir' => '/etc/localtime',
'target-dir' => '/etc/localtime',
'options' => 'ro',
},
'redis-lib' => {
'source-dir' => '/var/lib/redis',
'target-dir' => '/var/lib/redis',
'options' => 'rw,z',
},
'redis-log' => {
'source-dir' => '/var/log/containers/redis',
'target-dir' => '/var/log/redis',
'options' => 'rw,z',
},
'redis-run' => {
'source-dir' => '/var/run/redis',
'target-dir' => '/var/run/redis',
'options' => 'rw,z',
},
# TODO check whether those tls mappings are necessary
'redis-pki-extracted' => {
'source-dir' => '/etc/pki/ca-trust/extracted',
'target-dir' => '/etc/pki/ca-trust/extracted',
'options' => 'ro',
},
'redis-pki-ca-bundle-crt' => {
'source-dir' => '/etc/pki/tls/certs/ca-bundle.crt',
'target-dir' => '/etc/pki/tls/certs/ca-bundle.crt',
'options' => 'ro',
},
'redis-pki-ca-bundle-trust-crt' => {
'source-dir' => '/etc/pki/tls/certs/ca-bundle.trust.crt',
'target-dir' => '/etc/pki/tls/certs/ca-bundle.trust.crt',
'options' => 'ro',
},
'redis-pki-cert' => {
'source-dir' => '/etc/pki/tls/cert.pem',
'target-dir' => '/etc/pki/tls/cert.pem',
'options' => 'ro',
},
'redis-dev-log' => {
'source-dir' => '/dev/log',
'target-dir' => '/dev/log',
'options' => 'rw',
},
}
if $enable_internal_tls {
$redis_storage_maps_tls = {
'redis-pki-gcomm-key' => {
'source-dir' => '/etc/pki/tls/private/redis.key',
'target-dir' => '/var/lib/kolla/config_files/src-tls/etc/pki/tls/private/redis.key',
'options' => 'ro',
},
'redis-pki-gcomm-cert' => {
'source-dir' => '/etc/pki/tls/certs/redis.crt',
'target-dir' => '/var/lib/kolla/config_files/src-tls/etc/pki/tls/certs/redis.crt',
'options' => 'ro',
},
}
$storage_maps_tls = $redis_storage_maps_tls
} else {
$storage_maps_tls = {}
}
if $tls_priorities != undef {
$tls_priorities_real = " -e PCMK_tls_priorities=${tls_priorities}"
} else {
$tls_priorities_real = ''
}
pacemaker::resource::bundle { 'redis-bundle':
image => $redis_docker_image,
replicas => $redis_nodes_count,
masters => 1,
location_rule => {
resource_discovery => 'exclusive',
score => 0,
expression => ['redis-role eq true'],
},
container_options => 'network=host',
# lint:ignore:140chars
options => "--user=${bundle_user} --log-driver=${log_driver}${log_file_real} -e KOLLA_CONFIG_STRATEGY=COPY_ALWAYS${tls_priorities_real}",
# lint:endignore
run_command => '/bin/bash /usr/local/bin/kolla_start',
network => "control-port=${redis_docker_control_port}",
storage_maps => merge($storage_maps, $storage_maps_tls),
container_backend => $container_backend,
tries => $pcs_tries,
}
if length($replication_tuples)>1 {
$tunnel_map = $replication_tuples.map |$tuple| {"${tuple[0]}:${tuple[2]}"}
$tunnel_opt = " tunnel_port_map='${tunnel_map.join(';')}' tunnel_host='${tls_tunnel_local_name}'"
} else {
$tunnel_opt=''
}
pacemaker::resource::ocf { 'redis':
ocf_agent_name => 'heartbeat:redis',
resource_params => "wait_last_known_master=true${tunnel_opt}",
master_params => '',
meta_params => 'notify=true ordered=true interleave=true container-attribute-target=host',
op_params => 'start timeout=200s stop timeout=200s',
tries => $pcs_tries,
location_rule => {
resource_discovery => 'exclusive',
score => 0,
expression => ['redis-role eq true'],
},
bundle => 'redis-bundle',
require => [Pacemaker::Resource::Bundle['redis-bundle']],
force => $force_ocf,
}
}
}
}
|